|
|
|
|
This model delivers up to 225 amps of DC welding power in CC (constant current) or CV (constant voltage) mode. As a generator it provides up to 6kW of 120/240 volt AC power. This unit can be simultaneously used as welder and generator.
- Suits SMAW, FCAW, GMAW, GTAW and ACAC welding processes
- Operates as a 6kW generator and 225-amp welder
- Powered by a 12.3-hp Kubota Z482 diesel engine
- Brushless machine with a weather-resistant housing
- Regulates voltage at 2%t
- Low noise level of only 68.7dBA
- Also available in light tower configuration as model MLTSDW7
- Full instrumentation including controls for both CC and CV
- Trailer TRLRTMP mounted
Technical Documentation
No electronic documentation available. Please contact our Literature Department for more information.
|
|
|
|
|
|
| DC Voltage |
CC: 28 V |
CV: 15-28 V |
| DC Current |
CC: 225 A |
CV: 225 A |
| Current Range |
50-225 A |
Max Duty Cycle
w/ Full Amps Availible |
100% @200 A |
| Welding Processes |
SMAW
FCAW
GMAW
GTAW
ACAC |
| Fuel Tank Capacity |
6.6 gal |
30 L |
Fuel Consumption
at Rated Load |
0.6 gph |
|
| Overall Length |
45 in |
114 cm |
| Overall Width |
26 in |
66 cm |
| Overall Height |
31 in |
80 cm |
Shipping Dimensions
|
46 x 26 x 36 in
116.8 x 66 x 91.44 cm |
| Operating Weight |
671 lb |
305 kg |
| Shipping Weight |
689 lb |
313 kg |
|
AC Power Output
(Single Phase) |
6 kW |
| Cycle |
50/60 Hz |
| Voltage |
120/240 V |
| Amperage |
50/25 A |
| Voltage Regulation |
2 % |
| Receptacles |
NEMA 5-20R 125V GFCI 20A
NEMA L5-30R 125V Twist-Lock 30A
NEMA L14-30R 125/250V Twist-Lock 30A |
|
| AC/DC Simultaneous Use |
Standard |
| Lifting Bale |
Standard |
| External Drains |
Standard |
| Automatic Safety Shutdown |
Oil Switch
Water Temperature
Thermal Switch DC
Low Battery Charge |
| Idle Switch |
Standard |
| Optional Trailer |
TRLR-10W*, TRLR-MPXF** |
* Requires Adapter kit, **TRLR-MPXF has a built in 28 gal. fuel cell
|
|
|
Notice: Features and equipment specifications are subject to change without notice.
