|
|
|
|
Our new patent-pending design keeps handlebars level regardless of the saw’s cutting angle or attitude. This unique engineering greatly reduces operator strain and fatigue, while lessening the chance of back injury.
- Clutch-Free Blade Stop - patent-pending design allows operator to shut down the blade shaft with saw still running
- Totally sealed oil-bathed blade shaft spindle assembly provide optimum blade performance and 125-hour maintenance upkeep
- Control console, belt drive guard, engine side guard and handles are rubber mounted for vibration control
- No daily maintenance - only seven lubrication points that require service at 125-hour intervals
Technical Documentation
|
|
|
|
|
|
| Blade Shaft Assembly |
Dual Sealed, Full-Enclosed, Oil Bathed in Cast Iron Housing |
| Blade Shaft Diameter |
2.325 in |
60 kg |
| Arbor Diameter |
1 in |
25.4 mm |
| Blade Flanges |
Quick-Disconnect System |
| Blade Flange Diameter |
4.5, 6 in |
114, 152 mm |
| Max. Blade Raise Height |
20 in |
508 mm |
| Max. Depth of Cut |
15 in |
381 mm |
| Blade Flanges |
16, 20, 26, 30, 36 in |
| 406, 600, 660, 750, 900 mm |
|
| Make/Model |
Deutz BF3L2011 |
| Engine Power |
60 |
44.9 |
| Engine RPM |
3000 |
| Fuel Type |
Diesel |
| Fuel Capacity |
8.25 gal |
31.2 L |
|
| Transmission Pump |
Hydrostatic Pump |
| Propulsion (Wheel Motors) |
Hydraulic |
| Travel Speed |
0-275 ft/min |
0-84 m/min |
| Brake System |
Automatic Actuating Brakes |
| Rear Wheels |
12 x 3 in |
305 x 76 mm |
| Front Wheel Width |
8 x 3 in |
203 x 76 mm | |
|
Notice: Features and equipment specifications are subject to change without notice.
