|
|
|
|
Most submersible pumps will leave 1-2 inches (25-50 mm) of water as a minimum draw, this can be impractical when faced with a large surface area to pump out. The ST2038P has the ability to draw water down to 1/16 of an inch (2 mm).
- Automatic thermo-overload protection
- UL/CSA approved
- Maximum flow of 60 gallons (227 liters) per minute
- Weighs 31 pounds (14 kg)
- 1-hp motor
- Maximum head of 38 feet (11.5 meters)
- Double mechanical oil-filled seal for reliability
Technical Documentation
|
|
|
|
|
|
| Impeller Type |
Neoprene Rubber over
Cast-Iron |
| Impeller Disc Size |
2 in |
50 mm |
| Total Head |
38 ft |
11.5 m |
| Water Capacity |
60 gpm |
227 lpm |
|
| Pump Diameter |
7.7 in |
196 mm |
| Overall Height |
15.4 in |
391 mm |
| Operating Weight |
31 lb |
14 kg |
|
| Power |
1 HP |
0.75 kW |
| Phase |
Single |
| Voltage |
120 V |
| Starting Amperage |
56 A |
| Running Amperage |
8 A |
| Cable Length |
50 ft |
15.2 m |
|
|
|
|
|
Notice: Features and equipment specifications are subject to change without notice.
